Installation & Maintenance Videos

nora^® Cold Welding  

Get step-by-step instructions for grooving and applying nora cold weld into joints, as well as inside and outside corners. Includes appropriate tools and protective equipment.

Installation Videos |  4 min 9 sec

norament^® Cold Welding  

Get step-by-step instructions for grooving and applying nora cold weld into joints for nora flooring with a structured surface.

Installation Videos |  2 min 48 sec

nora^® Heat Welding 

Get step-by-step instructions to help you achieve properly heat welded joints for optimal appearance.

Installation Videos |  2 min 12 sec

Flash Coving 

Learn how to flash cove nora^® rubber sheets using the preferred boot method with nora profix tape. Includes proper technique for internal and external corners.

Installation Videos |  5 min 46 sec

Sanitary Base 

Shows the best way to install nora sanitary base for external and internal corners, making the corners ready for cold welding.

Installation Videos |  1 min 21 sec

Cold Welding Sanitary Base Corners 

Step-by-step procedure for smooth, clean cold welding for sanitary base corners.

Installation Videos | 

nora^® Water Droplet Test 

See how to test the substrate’s ability to absorb water to help determine an adhesive’s open, working and drying time.

Installation Videos |  1 min 14 sec

nora^® AC 100 Adhesive  

Learn how to properly apply the AC 100 Adhesive, as well as the appropriate flooring types, application and tools required.

Installation Videos |  3 min 6 sec

nora^® ED 120 Adhesive  

Learn how to properly apply the ED 120 Ahesive formulated for nora ESD rubber floors. Includes directions for applying copper strip to substrate as well as appropriate tools.

Installation Videos |  2 min 50 sec

nora^® Mat Bond Test  

See how to properly conduct mat bond testing to evaluate the compatibility of the flooring system components. The test procedure depends on the type of adhesive specified includes how to determine success or failure and how to troubleshoot test failures.

Installation Videos |  3 min 40 sec

nora^® nTx: Installing Sheets 

Learn the proper method for installing nora nTx sheets. Includes appropriate tools and best practices for creating clean seams.

Installation Videos |  3 min 6 sec

nora^® nTx: Installing Tiles and Planks 

How to install nora tiles and planks, including tips on removing sheet film and aligning tile corners and seams.

Installation Videos |  2 min 41 sec

nora^® nTx 020  

See how to properly apply nora nTx 020, which is required for all nTx installations to enhance the surface bond.

Installation Videos |  1 min 38 sec

nora^® nTx Bond Test  

Learn how to properly perform a bond test for nora nTx 020 to evaluate compatibility with all of the components of the flooring system.

Installation Videos |  1 min 7 sec

norament^® Stair Treads 

Learn how to install norament Stair Treads using nora stepfix 240.

Installation Videos |  4 min 35 sec

nora pads. Four cleaning pads. Some Water. The perfect system. 

Maintenance Videos |  1 min 25 sec