Sealing

Overview

• Hot welding rod
• Joint sealing compound
• nora accessories colour range

nora^® hot welding rod

For noraplan^® and noracare™ – available in matching coulors for all floor coverings.

In general, nora^® floor coverings do not need to be sealed. The only exceptions are noraplan^® acoustic floor coverings. For our other floorings, we recommend sealing the joints when the flooring has been installed on a moisture-sensitive subfloor, in rooms with continual and intensive wet cleaning, in areas with stringent hygiene requirements, or for special requirements (e.g. in laboratories).

In operating theatres or other small surfaces where the joints of the skirtings are sealed with nora^® joint sealing compound, the compound can also be used for these surfaces to harmonise the installation process.

Art. 946

Round, Ø 4 mm, rolls of 100 metres

nora^® joint sealing compound

For all nora^® floor coverings

It is not generally necessary to seal nora^® floor coverings. The exceptions are electrostatically dissipative noraplan^® floorings. However, we do advise sealing the joints if the subfloor is moisture-sensitive, in rooms subject to intensive wet cleaning, or in areas with special hygiene requirements. In these cases, we recommend sealing all nora^® floorings.

Art. 928

300 ml cartridge

1 disposable cartridge, sufficient for 20–25 r.m.

Please note: Joint cutter (art. no. 116950) and nora^® liquid wax (art. no. 109914) may be ordered from our company.