Transition line

Product Solutions

nora nTx - The Revolutionary Fast Installation System

Because the powerful adhesive is factory-fitted, nora nTx is as simple as it is ingenious. In a few simple steps, the flooring can be cleanly and safely installed and used immediately.

Does this sound familiar?

“I cannot allow ward areas to be closed for renovations.” 
Petra Günther, Head of the “Glück Auf” Nursing and Care Center, Benndorf

“We are concerned that during the planned renovation, tearing out the old floor coverings could cause sustained damage to the subfloor.”
Matthias Kopf, Director of Construction in the District Administration of Landshut Lower Bavaria

“It is important to us that with new construction as little dust and dirt as possible is produced, and that we can use the new production hall as quickly as possible.”
Ronald and Marcel Fischer, Managing Directors of SanaCare Gesundheitsprodukte GmbH & Co. KG, Alsbach-Hähnlein

The solution is called nora® nTx – this floor brings its adhesive strength along from the factory.

With nora® nTx you can reduce installation time by up to 50% and can even carry out renovations during ongoing operations. Installation problems like bubbles, residual indentations, or seams belong to the past.

*10 year warranty for the criteria given in our warranty conditions.

What is nora® nTx?

nora® nTx is a new and unique technology for the professional installation of nora® rubber floor coverings. Ingeniously simple – nora® nTx brings its adhesive strength along from the factory. The flooring is cleanly and safely installed in only a few steps and immediately ready for use. And this can be done on the concrete or cement screed subfloors typical in new construction, as well as over other existing floor coverings. Even high residual moisture in the subfloor is not a problem for nora® nTx.

nora® nTx | the system configuration

nora nTx

1. subfloor  2. nora® nTx 020 (Primer)  3. nora® nTx floor covering with self-adhesive back

nora® nTx consists of our noraplan® and norament® standard floor coverings, which are equipped with an adhesive backing. The adhesive is covered with a protective film. The glue – like our floor coverings – is rubber-based and particularly health-friendly. Specially developed installation materials and tools for nora® nTx provide functional safety and ensure the highest quality standards. In June of 2016, nora® nTx was awarded the “Plus X Award” in the “High Quality and Functionality” category.

Events |  Show All

nora nTx – The quick installation system (Webinar) 

24. September 2024 10:00 - 10:30 o'clock | Online
Germany | Trainings

During this webinar you will discover the characteristics and advantages of our quick installation system nora® nTx. Since the floorings are equipped with a strong adhesive backing, they can be cleanly and safely installed in a few simple steps and used immediately.


The installation of nora® nTx is very easy and fast:

roll out floor covering and cut, remove protective film, glue, roll on – finished.

Compared to conventional wet bonding, it is possible to avoid multiple work steps and thus error sources, for example the application of the adhesive, as well as drying and waiting times.

Videovorschau Vorstellung nora nTx

Learn more about how quick and reliable nora nTx can be installed 

With nora nTx you can lay flooring quickly and easily in a few simple steps – with no waiting time. nora nTx flooring can be laid directly on existing surfaces – even with high levels of residual moisture – and can be used immediately. Laying nora nTx flooring reduces downtime, saves costs and minimises the risk of errors.


Real Life Proof

Preview to reference video SanaCare

norament nTx directly on concrete floors - reliable and fast, even with residual moisture 

We wanted to move into the new hall quickly and didn't have a lot of time to waste laying flooring or smoothing, filling etc. - see how Sana Care managed this and listen to CEO Marcel Fisher in this video.

Vorschau-Bild zum Video schnelle Sanierung

New look in a short time with very little dust and dirt 

For the quick refurbishment of the administration building of the District Lower Bavaria nora nTx has been installed floor on floor. Henri Meyer about the new experience.

Preview video quick school renovation with nora nTx

norament nTx installation on existing flooring 

No time for extensive subfloor preparation? Why don't you try our revolutionary quick installation system nora nTx. In the video you can learn more about norament nTx installation on existing flooring in only one day.


FAQ – Frequently Asked Questions

What’s nora nTx made of?
nora nTx consists of our norament or noraplan standard floor coverings fitted with an adhesive backing. This adhesive backing is lined with a protective film. Like our floor coverings, this adhesive is also based on natural rubber and is free from health hazards.

Will the existing nora product properties change?
nora nTx is manufactured from our nora standard floorings, so all product properties remain unchanged. The properties can be taken from the technical data sheet.

Which products are available with nora nTx?
nora® nTx is available as sheetware and tiles. In our standard assortment we offer a colour selection of noraplan® signa and sentica (2,1 mm thick) and norament® 926 castello, grano, satura and arago (3,6 mm thick). Further colours and designs are available on request.

What requirements does the substrate have to fulfil before the product is installed?

As for all installations, it is generally assumed that the subsurface is an intact screed/concrete floor fulfilling the standards in the respective country.

Defects on the surface must be levelled.

Can nora nTx be installed on all substrates?
nora nTx can be used on all conventional screed/concrete substrates. These include cement screed, quick cement screed, calcium sulphate screed, vacuum concrete, and concrete. nora nTx can also be installed on existing, smooth floor coverings (e.g. natural rubber, linoleum, PVC) and on other subsurfaces (e.g. wood, aluminium). These, however, must be permanently and securely bonded to the substrate and must not have any cavities. nora nTx may not be installed on heated subsurface structures. The use of nora nTx on a heated subsurface structure is possible without restrictions if a corresponding heating protocol is available and the required moisture values are complied with.

How to install nora nTx?
Depending on the consistency of the subsurface, nora nTx can be installed without prior trowelling over the whole surface. In general, the subsurface must first be treated accordingly and primed with nTx 020. Details can be taken from the nora nTx installation recommendations.

How to clean nora nTx?
nora nTx is cleaned exactly like the nora floorings. There are no differences in cleaning.

Further Videos and Topics

Preview nora nTx installation

nora nTx installation 

With nora nTx you can lay flooring quickly and easily in a few simple steps – with no waiting time.

Preview video norament nTx installation on mineral subfloor

norament nTx installation on new subfloor 

norament nTx installation on new, mineral subfloor


norament castello nTx installation – Floor on floor 

In this video, we explore the remarkable transformation of the lobby flooring at gruenphase, a multimedia agency in Viernheim, Germany. The agency's project aimed to quickly redesign its lobby floor, focusing on aesthetics, sustainability, and functionality. They chose norament 926 castello nTx, a rubber floor covering with an elegant appearance that can be installed over the old flooring with ease. This sustainable solution offers durability, easy maintenance, wear and slip resistance.

How to contact us
Sign up for Updates
Find nora on LinkedIn
Latest news & Events