Initial cleaning

Regular maintenance may be carried out immediately thanks to the special surface of the floorcovering, provided the site is not heavily contaminated.

Regular maintenance

Manual cleaning: Good cleaning results are achieved by 2-stage mopping (2-mop system + twin mobile bucket) or also with a special 1-stage cleaning system with suitable microfibre covers and suitable maintainers.

Machine cleaning: Machine cleaning is suitable for large, unobstructed areas.
For this purpose, suitable red pads or suitable soft brushes and low-foam cleaning agents according to the cleaning agent manufacturer’s recommendations should be used.

Intensive intermediate cleaning

If dirt build up can no longer be removed by regular maintenance, an intensive intermediate clean with a single-disc machine with suitable red pad should be performed.
The selection of the cleaning agent depends on the level of contamination and the type of residues; therefore, please consult the cleaning agent manufacturers for suitable cleaning agents, such as basic cleaning agents or intensive cleaning agents.